Simple Steps to Create Hexagon Gazebo

Posted on

Simple Steps to Create Hexagon Gazebo – A gazebo is usually built in octagonal shape, but with the help of the proper hexagon gazebo plans you can build a gazebo with six sides. This will add charm to your page to be imitated. Although it may seem daunting, it really is easy to plan and build. To make this structure is very similar to creating one octagonal. The following are the instructions that you can use to make one yourself.

Steps To Create Hexagon Gazebo


Simple Base can be made easily with concrete. Select a suitable place for your gazebo. A hexagon gazebo has a distinctive shape and may or may not be appropriate in every surrounding. A great place will enhance the beauty and grace. Clean this place thoroughly. Remove weeds, rocks and stone, if any. Dig the soil mounds and filling the holes, leveling the ground with large heavy rollers.

Now to make the floor, combine basic mix concrete by following the instructions on the bag. Spread this mixture evenly and properly leveling the land pre-cleaned. Try to avoid sliding and trenches. You can now place tiles, wooden flooring etc. on a layer of concrete to provide a sophisticated touch. Your area should be plastered around 10 square feet. Let it dry for a day.

Make a hole

The next step to follow the plan of this hexagon gazebo is digging a hole around the loop that you created earlier. If you have not your concrete plastered in circle shape don’t worry, just draw a rough circle on it with the help of threads. Mark its Center. Now using threads and lime as a compass, divide circle in six equal parts. These signs will serve as the point where the hole should be dug up. With shovels digging 12 inch whole in this sign.


Take a 6 length of wood each 14 feet. This should be cured wood and must be the same length and width. We recommend that you use a round pole. Bury this pole respectively one by one in every hole but instead of using the land to fill in the holes using a concrete mix. Let it dry for a day or two.

Read also:  Simple DIY Side Table Ideas For Beautiful Modern Home Furniture

Head beam

If the concrete has dried, check all the posts from the same height. If not, slicing away the tops to make them the same. To make a coat for your structure, you can use 6 polar 4 x 4 lumbers. This will be about 40 Inch. Nail the wooden post cured up to your previous post pole buried. For additional support of the use of metal strips, cut away any rough edges.

With bracing you can enhance the beauty of your gazebo. Buy some pre-made braces gazebo from the market and nail them to the wall post.


You now need a set of 6 wooden pillars. This should not exceed 74 Inch in height. You also need small beam of wood to serve as a hub. Screw this 74 “fast post hub one by one. You should keep in mind to maintain an angle of 45 degrees. A hexagonal cone is formed. Lift the cone to the top of your pole with some help so that every angle to coincide. Nail this post.


Measure the window triangles like the gap that is created by each hexagonal face of the top. Cut six fruit such as appropriate. Each nails from the inside of the top of you and then applies the shingles. Thus, according to the plan of the hexagon gazebo you are now done.

Leave a Reply

Your email address will not be published. Required fields are marked *